Joist Hanger and Connector-Nail Count
Joist hangers and the connector nails that fill them.
Example
You enter
- Joist-run width (ft) 16
- Joist spacing (in) 16
- Hung ends per joist 2
- Connector nails per hanger 10
You get
- Joists 13
- Hangers 26
- Connector nails 260
Details, formula, and sources
joists = ceil(width x 12 / spacing) + 1; hangers = joists x hung ends; nails = hangers x nails per hanger. A 16 ft-wide floor at 16 in on center is 13 joists, hung both ends, so 26 hangers and about 260 connector nails; if one end bears on a beam (ends = 1) it is 13 hangers and 130 nails. Every hanger hole is filled with the specified structural connector nails (not roofing nails); the manufacturer sets the model. Distinct from the deck ledger fasteners.
joists = ceil(run_width_ft x 12 / spacing_in) + 1; hangers = joists x ends_per_joist; hanger_nails = hangers x nails_per_hanger.
Joist-hanger count identity by name (joists across the run, hangers on the hung ends, filled holes); first-principles count arithmetic.
The count arithmetic is public first-principles; the hanger model and nailing come from the connector manufacturer.
Estimate. AHJ and licensed professional govern.
Field names used by the API: run_width_ft, spacing_in, ends_per_joist, nails_per_hanger, joists, hangers, hanger_nails
- Hung ends 2 for a joist hung both ends; 1 if one end bears on a beamframing layout
- Nails per hanger ~10 filled holes with structural connector nails (default); the manufacturer's schedule governsconnector manufacturer